Chaim Zax

I did a similar test (GMC-500Re 1.06) and I do see something is off. I'm not sure if this is a firmware issue or my misunderstanding on how it should...

This makes things more clear. I redid the test but now adding a "Note/Location" with the message "Home", except the count values for hours the result is as I would...

Thanks for the feedback. Most likely this is an issue with different firmware versions. I'll need to update to a new firmware version and see if the issues indeed pops...

When connecting to the device the tool typically shows the device type and firmware (or by requesting explicitly "./gq-gmc-control.py -i"). In your case GMC-500+Re 2.0 (firmware revision 2.0), and in...

Thanks for the feedback. Indeed, they changed to protocol. I've compared the specs and the differences are apparent. In the previous version: Command: GETCPM Return: A 16 bit unsigned integer...

Unfortunately from revision GMC-500+Re 2.x on they changed to protocol, the library was designed using the Re 1.x firmware. See issue #3 for more info.