FastFlix

FastFlix copied to clipboard

Add Hardware VAAPI encoding support

2

This is more difficult as basic things like scaling are [done differently](https://trac.ffmpeg.org/wiki/Hardware/VAAPI) with vaapi. Opening separate issue to track this and possible beta tries with this version.

cdgriffith

[Feature Request] Change the default priority of spawned tools

2

Basically, a combo box that permits setting the default priority of the spawned programs by Fastflix. IE: Realtime, High, Above Normal, Normal, Below Normal, Low. My primary, use case, is,...

maxpiva

In @rigaya 's [QSVenc latest versions](https://github.com/rigaya/QSVEnc/releases/), many improvement quality parameters has been added: https://github.com/rigaya/QSVEnc/blob/master/QSVEncC_Options.en.md#--adapt-ref= Hope that inspires !

MarcoRavich

Just discovered this interesting tool by @wswartzendruber: > This is intended to facilitate individuals in converting their physical HDR10 video libraries into HLG, thereby allowing more universal viewing on devices...

MarcoRavich

x265 parameters not recognized

1

Hi I used your soft since few days but I have some problem with x265 parameters. using additional x265 params, i tried to activate several params : ref=5:deblock=1,1:subme=7:scenecut-aware-qp=3:ipratio=1.30:pbratio=1.20:aq-mode=4:aq-strength=0.70:psy-rd=1.5:qblur=0.6: qcomp=0.80:tu-inter-depth=4:tu-intra-depth=4:limit-tu=4:max-merge=5:aud:hrd:rc-lookahead=60:lookahead-slices=1:amp:limit-refs=2:no-limit-modes:weightb:no-sao:early-skip:rskip-edge-threshold=0.05:b-intra:vbv-init=0.9:min-vbv-fullness=50.0:max-vbv-fullness=80.0:sar=0:chromaloc=0:level-idc=5.1:selective-sao=0 but...

zorrax2b

Output format selection

7

Currently the output file selection box only supports *.mkv(though I can manually input a *.mp4 filename or so on, ignore the warning about output format mismatch and start encoding). Could...

leonardyan

Batch processing support

5

I would love to set default settings for video (h265, CBR etc.) and audio (like ac3, bitrate etc.), subtitles - and then drag a lot of files / folders into...

moonwhaler

Hello, When working on many files like TV series and doing lots of copy pasting, will be easier if you consider adding an option to select Default tab. Example, after...

Wontell

NVencC Mode: Audio Conversion from DTS-HD 7.1 to EAC does MONO instead of 7.1

3

Hello,. when i enable conversion of DTS HD MA 7.1 to eac 7.1, channel's set to no downmix The log always shows this line: **avwriter: hevc, #2:dca/7.1 -> eac3/mono/768kbps, ac3,**...

Wontell

I often tear down my builds and so have scripted re-installs to make getting back to square one a lot less hassle. To that end, if a [winget release](https://github.com/microsoft/winget-create) could...

techie2000