Chris Bagwell

I just swapped out my Creality board for an SKR Mini E3 V3.0 and ran into this compile issue. I've mostly gotten it working but could use some input on...

I am seeing same reboot behavior on a 2018 MacBook Air USB-C. It wouldn't reboot when hooked to laptop when using stock Pinecil firmware but started rebooting after upgrade to...

@luchomasco This FR would only help for case HW PWM is enabled and V4.2.2 does not have enabled by default. Once enabled, it will default to 1kHz and so you...

Having played with changing HW PWM a bit now, I think this is probably 2 feature requests. One is for people hooking their lasers to parts cooler fan and wanting...

Based on the discussions in #18598 and #18637 , the servo interrupt priority change could improve BLTOUCH reliability even for cases when ADAPTIVE_STEP_SMOOTHING is disabled. It looks like a version...

I quickly looked over ADAPTIVE_STEP_SMOOTHING and didn't see any calculation that should be an issue for cortex-m0. The main issue there is if any cycle estimates are off then ADAPTIVE_STEP_SMOOTHING...

Here is an idea for people to try to see if BLTouch issues are related to SKR Mini E3 V3.0 having a slower CPU. I hooked up a MAX7219 to...

It looks like I left out an important change in my description. Your report of 50Hz made it easy to find though since it hints at a servo conflict. The...

I am sorry to have made it harder than it should be since I gave wrong filename. I meant the file stm32f1.ini in the "ini" directory at top level of...

I came across this issue trying to find why Cura crashes on MacBook. After reading this, it did make me realize it seems to only do it after resuming from...