casainho
casainho
I am not interested as I am not using anymore this controllers and motors. If no one want to maintain it, then I would put this repository in archive mode,...
> You can read out the entire motor configuration over UART or USB using VESC Tool. If you want to make a config serializer/deserializer yourself that is possible too from...
> Probably under NDA My expectation to buy a dev board with BL808 were to get a cheap small Linux board but with Wifi, BLE and Zigbee. If I can't...
Issue still exists on Joplin 2.13.10 Linux version.
Hi. I would be interest in having a Telegram channel so the development could be discussed. I am on 2 channels doing real development for EBike and EScooter motor controllers,...
@sffranke many thanks!! I didn't know yet that project and I am loving the documentation like for simulation and kinematics, I need to learn all of that!! https://spotmicroai.readthedocs.io/en/latest/kinematic/ As for...
I think this is really important. And I wish micropython would link on their page for this web editor + web file manager.
Please have a look to this, and see if you are not force to reinventing the wheel: https://github.com/jczic/ESP32-MPY-Jama 
Seems there is some information here on how to do it: https://forum.micropython.org/viewtopic.php?t=12373&p=67136#p67141
I come from the CircuitPython webeditor, and there, there is a big button saying "SAVE + RUN". That is what I am looking for, the file to be saved on...