careyer

not an issue: WiFi Pinapple Nano Clone - look alike

11

Hi, just wanted to share how a WiFi-Pinapple Nano Clone can look alike. Added a 4 Port USB Hub with a custom CNC milled enclosure right under the AR150. Looks...

ReCon: Scan Timer does not work as expected

1

Just realized that the Scan Timer (15sec, 30sec, 1min, 2min... etc) seems to not work correctly. Regardless of what setting is chosen the scan will be finished after some seconds....

not an issue: Custom P4wnP1 USB-Stick like enclosure

5

Hi @mame82, Hi All, I love my little P4wnP1 fellow so much that I deceiced to build a custom enclosure for it. Together with a [USB-A Addon Board V1.1 USB...

P4wnP1 incorporated into a Keyboard

9

Not exactly an issue/bug report but just some experience from incorporating a P4wnP1 into a USB keyboard. I used a cheap USB 2.0 High Speed Hub from ebay (#301820219992) in...

Take a look to this 3,3V Beetle

7

Sorry, no issue but wanted to let you know: http://www.ebay.de/itm/Beetle-Leonardo-ATMEGA32U4-Mini-Development-Board-Arduino-kompatibel-296/321914373613?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 It is 3,3V ready out of the box ;-) Cheers! Keep up the good work

Character "X" not comming through + change keyboard layout (US -> DE)!

15

Hi, I just got my ducky working... however I realized when printing "ABCDEFGHIJKLMNOPQRSTUVWXYZ" that the output sequence will only be: ABCDEFGHIJKLMNOPQRSTUVW I tryied to print just the letters XYZ and...

No issue (but kind question) on Pi4 HEVC / H.265 hardware based decoding

22

Hi guys, congratulations on this wonderful project. Your achievements are awesome! Kudos! Please allow me an off-topic question: I work on another project which is all about live-streaming footage from...

2.1 Dev - Innomaker IMX290 (likewise all veye based cams) not recognized

3

for 2.1 Dev Innomaker IMX290 cameras do not get recognized. - no detected camera shows up in` /tmp/manifest` - accordingly unit starts up as GrounbPi - tried also with `dtparam=i2c_vc=on...

2.1 Dev - Support for Thermal cameras incomplete (Flir driver)

1

I sampled manifest and config files for the following cameras: - hti-301 - FlirOne (2nd Gen) here are the results: 1. **hti-301 does get recognized** /conf/openhd/vehicle1/camera.conf ``` [Camera] # DO...

extlinux.conf on production modules (eMMC) always has priority over other drives

2

Hey there! Many thanks for this awesome work! I played arround with it on my Jetson TX2 NX production model (eMMC). **Describe the issue** Is there a way to specify...