CaCO3

I also saw that it sometimes does not start the auto flow, but I doubt it is because of the log level! There must be another coincidence for this!

I just tried it with the latest rolling. For me it work fine in all log levels! I don't think there was a relevant change for this since 13.0.5, but...

Please reopen if needed

Bitte logfile mitliefern!

Ohne Logfile und Config ist es unmöglich, das Problem verstehen zu können! => Bitte nachliefern!

Ich schliesse das mal. Bei Bedarf bitte wieder öffnen und mit der neusten Firmware ein Log hinzufügen

https://github.com/jomjol/AI-on-the-edge-device/issues/1161

We have now the web console and a reply-bot-response, wiki page no longer needed

Just to make you aware: https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-guides/lwip.html#ipv6-support > Both IPv4 and IPv6 are supported as dual stack and enabled by default https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-guides/lwip.html#lwip-ram-usage > Disable [CONFIG_LWIP_IPV6](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-reference/kconfig.html#config-lwip-ipv6) can save about 39 KB for...

> hello @jomjol , how do crop digits, rotate, and save? can it be written using arduino ide? if so, how to write? please open a new discussion for this!