cableguyed
cableguyed
Verified that if you save the gcode file, open with notepadd++ or similar and cut the ;gimage and ;simage sections, paste them at the very end, the thumbnails come right...
Hi, If you click on the down arrow next to the print tab and select save as gcode instead, then create the file, edit it to make it show the...
That made no difference for my X-Max3. On Mon, Jul 15, 2024 at 7:12 AM pmbroth ***@***.***> wrote: > This is what I did, and it works on my qidi...
Compiling the python script (with minor tweak to get the start point fixed) works great for both my X-Max3 and X-Smart 3. Thanks Nicola!
First, make a copy of the qidi_thumbnail.py just in case... I had to edit the qidi_thumbnail.py to change the " # Find the start and end of the thumbnail block"...
I only update firmware from qidi direct, don't know if that makes a difference. On Mon, Aug 26, 2024, 2:34 PM ovidakis ***@***.***> wrote: > First, make a copy of...
I looked at the script and it didn't match the gcode that my X-Max3 made so I edited it to catch the proper start and end lines of the 2...
Glad to hear! On Wed, Oct 30, 2024 at 12:44 PM pmbroth ***@***.***> wrote: > I firgured it out. I compoiled the script and all works... > > — >...
Hi Bob, It has been a while since I did it but you need to download an IDE in order to compile the script into an exe. There are several,...