Bernd Zeimetz

> Are you talking about tagged or plain series? Do you want exactly the white list of targets? I had a thought to make a white list of prefixes for...

Also I think you want to select the Paths from graphite_index first, then remove the data from the graphite table and then tidy the graphite_index table? Does that make sense?

> Does not require 2 hands... press the P, then press the A. You don't have to hold the P down. I know. It is still painfully slow. A shortcut...

https://www.st.com/en/mems-and-sensors/lsm9ds1.html is used by the skybean strato, might also be an option.

> https://invensense.tdk.com/download-pdf/icp-20100-datasheet/ I think if you only want to replace the baro sensor - why not use the bme280 (didn't check if that will work on the same bus as...

(Or by BME280 + LSM9DS1, for example. There is no current gyro + baro module on one board from adafruit, but I'd happily order some from jlcpcb and publish the...

https://www.waveshare.com/product/modules/sensors/accelerometer-angular-rate-compass/10-dof-imu-sensor-d.htm might be an option, even if its using the bme280 - but its a module that is just available for everybody to buy. Or https://www.dfrobot.com/product-818.html which is a bit...

I've done some more investigation. The chips on the waveshare module (and the gy-912) are also retired. The current models like the icp20100: ordered, delivery unknown or next year... Same...

not sure if @jcharaoui's case is the same the bug reporter is having, but it is definitely an issue we always run into.

de1d0ca95c3a4e5f09ea29843219abde2e277db9 is the reason for that - including ::collectd everywhere is not such a good idea. Especially as it breaks the way to use the module as described in README.md...