bsafh

available attributes: hvac_modes: auto, heat, off min_temp: 4.5 max_temp: 30.5 target_temp_step: 0.5 preset_modes: boost, comfort, eco, none current_temperature: 23.6 temperature: 17 hvac_action: idle preset_mode: none interface_id: RaspberryMatic-BidCos-RF address: KEQ0510114:4 model:...

first wild guess for a config HM-CC-RT-DN.yaml calibration_type: 1 calibration_round: true has_system_mode: True is this correct?

additionally you can group TRVs in RaspberryMatic (e.g. those in one room). They then act like one TRV (even when physically changing the setting on one of the TRVs by...

Heat means: heat to the target temperature Auto means: act according to the schedule set locally in the thermostat (programmed through direct input at the thermostat or through RaspberryMatic) I'll...

the swap option says: "Wenn das Thermostat den modus auto als heizen und heizen als boost benutzt, kann es getauscht werden (für Google Home nutzer)" the TRV has a manual...

> addressed in Beta 19 does not work in Beta-19, target_temp_step ist still 1, not 0.5 model is "generic" as well furthermore, recreating the TRV_BT device results in two identically...

> furthermore, recreating the TRV_BT device results in two identically named TRV_AI, which confuses things quite a lot it seems a better_thermostat sets the Unique_id identical to "name", i.e. the...

There seems to be an additional problem: better_thermostat seems to update the target temperature quite often (every second?). This causes the RaspberryMatic control system to overload, at least in my...

debug log attached [better_thermostat.debug.log.txt](https://github.com/KartoffelToby/better_thermostat/files/9594146/better_thermostat.debug.log.txt)

attached [config_entry-better_thermostat-0c504b95d89d1124e23a519b725dc119.json.txt](https://github.com/KartoffelToby/better_thermostat/files/9596349/config_entry-better_thermostat-0c504b95d89d1124e23a519b725dc119.json.txt) there might be some temporary communication interruptions with the TRV due to the "Duty Cycle" being too high in RaspberryMatic, but all in all, that should not happen...