brutzler
brutzler
> https://github.com/sobieh/bttrelay You can use this one. I modified it to support TURN OFF and TURN ON without need to reset. Can anybody implement a delay function for "power off"?...
Thx for your answer. My english is not so good to understand all very well. Fact is, that klipper is not powered by a secondary power supply. It is powered...
This way? --------- main_loop_on: jb p5_5, main_loop_continue mov r7, #030h ; delay(30000) 30 sec mov r6, #075h lcall delay setb p5_5 ; turn off 230v lcall set_rx ------------------------
> Is there a way to increase turn off time (15 sec) after started up? After some tests with the relay module, I see, that my only need is to...
same here. PC5 is only working randomly. And to say: why is this plug different to the others? Neopixel (J26): 5V-SIG-GND All others in the same area (J22...J25): 5V-GND-SIG Can...
> pc5 is the s pin of the neopixel, as long as the configuration is correct, the wiring is correct, the pin is not burned out, it can work I...
You could check the length of your ssid and/or pw. It is limited to 50 characters.
Yes, they do the same: ` // Delete CR and Space. ` ` if (ch == '\r' || ch == ' ') { continue; }` And IMHO BTT is not...
IMHO there will be now future release from BTT. They do not develop any software for this module. only copying code stuff from internet. But you can do it for...
Try this: [https://cloud.mail.ru/public/3zqi/3ecDR82hg](https://cloud.mail.ru/public/3zqi/3ecDR82hg)