Joacim Breiler

Not updating positions in status report

7

Sorry for this noob issue... But I've been experimenting for a couple of hours and I'm not getting anywhere. I've tried loading my Due with the g2core-gShield-100.26.bin (I've also tried...

Feed value is interpreted as mm/min when using G20

2

I'm trying to figure out how the feed speed is interpreted by g2core. In this GCode I'm switching to G20 and then a do a G1 movement two inches at...

Add support for Marlin firmware

123

## Feature request Add support for Marlin controllers: http://marlinfw.org/ It may not be the first alternative for CNC machines as it's mostly focused on 3D printing. But the firmware supports...

Figure out how settings should be stored between different versions

2

### Version Other ### Hardware / Firmware Other (add details about it below) ### What happened When upgrading from one UGS version to another, how should the settings be transferred?...

### Discussed in https://github.com/winder/Universal-G-Code-Sender/discussions/1723 Originally posted by **khturnings** November 13, 2021 Can Open Recent be added to the file menu. I know these are available on the welcome page but...

Add settings to the visualizer that remembers what features to show.

Some hardware reports the machine position and the max travel position differently. For instance, there is an compile setting in GRBL that can invert this. This makes the machine boundary...

Replace the LCD font in DRO with a monospaced one. It should also be able to scale down. 

Investigate why the transfer speed is worse with newer version of UGS ### Discussed in https://github.com/winder/Universal-G-Code-Sender/discussions/1556 Originally posted by **DevEvV** March 14, 2021 Why does the old version of the...

### Discussed in https://github.com/winder/Universal-G-Code-Sender/discussions/1656 Originally posted by **riaanmarx** August 8, 2021 Would it be possible to add a configuration setting with which to set the line thickness of the traces...