Brandon Chuang
Brandon Chuang
Modify driver and onlp to support YM-1151F The airflow direction is front to back The output of onlpdump is as follows: psu @ 1 = { Description: PSU-1 Model: YM-1151F-A01R...
Update the thermal threshold values provided by hardware team. The unit of temperature is degree Celsius. CPU Warring 70 Error 75 Shuntdown 80 LM75-4B Warring 65 Error 70 Shuntdown 75...
- Remove i2c mux 0x72 which is used by BMC - Use GNU indent to format peripheral drivers - Add BMC detection in __init__.py - Add ONLP_SFP_CONTROL_RESET in sfp.py Signed-off-by:...
Detect BMC in __init__.py to make sure /dev/ipmi insterface is ready Signed-off-by: Brandon Chuang
CPU: Intel Broadwell-DE, 4 Core MAC: Broadcom BCM88690 TCAM: Broadcom BCM16K knowledge-Based Processor PHY: Broadcom BCM81724 CPLD: ALTERA 10M04SAU169C8G (1pc, BGA169 package) ALTERA 10M04SCU169C8G (2pc, BGA169 package) ALTERA 5M1270 ZF256C5N...
Disable intel_iommu to prevent below error messages: [10672.868940] DMAR: [DMA Write] Request device [00:12.0] fault addr 0 [fault reason 05] PTE Write access is not set [10672.869183] DMAR: DRHD: handling...
Add sysfs driver to access the ioport of mux reset to prevent from i2c bus to get locked. Command to reset i2c mux: echo 1 > /sys/devices/platform/as9716_32d_ioport/i2c_mux_rst Command to bring...
CPU: Intel Broadwell-DE x86 8 cores MAC: Broadcom BCM88795 PHY: Marvell 88E1111 & INPHI CS4227 CPLD: ALTERA 5M1270ZF256C5N (3 pcs, BGA256 package) FPGA: ALTERA EP4CGX30CF23C7N (1 pc, BGA484 package) ALETRA...
Symptoms: 1. It takes around 10 seconds to read the eeprom of the transceiver with pages. sfp_optoe_base reads the eeprom too many times. 2. The exception occurs when a transceiver...
CPU: COM-e Module Ice Lake-D (D-1713NT 4C or D-1734NT 8C) MAC: Broadcom Tomahawk 5(BCM78900), 1 pcs, 51.2Tbs multi-layer Ethernet switch controller RAM: DDR4 SDRAM (16GB x 2 with ECC (SO-DIMM)...