Bram Gerritsen
Bram Gerritsen
I would suggest to enable debug mode first for the powercalc logs. That should hopefully give some more insights.
Could you provide details / screenshots what you actually enter during the configuration wizard? And when do you get this error exactly? By clicking "Submit", if so, one what step?
Thanks for the information. the LUT file provided by powercalc are made for each of the supported color modes of the light. You can see that in the supported model...
I see the problem. Your light supports `color_temp` and `hs`. `hs` is the mode for when the light is in color control mode. And this is correct because the light...
Not sure, you can at least try. Have a look if the power is slowly increasing, and no 0 readings on low brightness levels. When you see if gives no...
You'll need to copy the gzipped files `*.csv.gz`. The normal csv files won't be loaded by powercalc loading logic.
How does the measurements look before the 52%? You could visualize these in https://www.csvplot.com. Strange you are running into 0 readings in the middle of a measurements session. When you...
Added with #2059. Will be in next release. You can select that in the last step of the GUI flow.
It's only added on creating virtual power sensor. I'll consider to also add to real power dialog.
I have implemented this with #2100 and #2099 To not polute the dialog with utillity meter options I have made this a separate step. This step is only presented when...