Patrik Hermansson
Patrik Hermansson
I'm running on a ESP-01. I've checked that the SPIFFS is working with the CheckFlashConfig-sketch: ``` 18:42:58.258 -> Flash real id: 001440E0 18:42:58.258 -> Flash real size: 1048576 bytes 18:42:58.258...
I use the "Esp8266-Client" as base to get data from a Home Assistant server. I changed my Wifi credentials, and as HA needs a token I added this line: `...
I'm trying to flash a Nedis WIFIPO110FBK but it fails. It just keeps "Resending SmartConfig Packets" until it times out. [smarthack-mqtt.log](https://github.com/ct-Open-Source/tuya-convert/files/7661512/smarthack-mqtt.log) [smarthack-wifi.log](https://github.com/ct-Open-Source/tuya-convert/files/7661513/smarthack-wifi.log) [smarthack-udp.log](https://github.com/ct-Open-Source/tuya-convert/files/7661514/smarthack-udp.log) [smarthack-psk.log](https://github.com/ct-Open-Source/tuya-convert/files/7661515/smarthack-psk.log) [smarthack-web.log](https://github.com/ct-Open-Source/tuya-convert/files/7661516/smarthack-web.log) 
I try to use tuya-cli to access devices: DEBUG=* .npm/bin/tuya-cli wizard But I get this: There was an issue fetching that device. Make sure your account is linked and the...
When I boot the Qemu-image in Fedora 27 the guide runs fine to the point where the apps are shown. Then the alarm and calendar app starts to roll over...
This fills my logs, one every second: 23.03.20 18:37:42 (+0100) snapcast-client 2020-03-23 17-37-42 [Err] Error in socket shutdown: Transport endpoint is not connected Running balenaOS 2.46.1+rev1 on a Raspberry Pi...
Maybe it's a good idea to present more info on the serial port when running in normal mode, ie not with DEBUG active? Like IP-adress, topics and such.
In addition to Mqtt, we could use a web gui for configuring the board.
If no frequency is set via Mqtt, the frequency is set to 0. Change this so a default frequency is used instead. "if freq=0 then freq=8680000".
In the documentation I find a link to what is supposed to be installation instructions for custom cards. Instead I find information about how to make a custom card ("_Installing...