boiler54

Results 4 comments of boiler54

I just setup a new system with a string of TM1814 and I'm seeing the EXACT same issues. Running 0.13.1 on ESP32. Power supply is clean and strong and works...

@rjmcfadd I will try switching pins to see if that helps, thanks. I'm using a bare ESP32 with level shifters on the data lines.

@rjmcfadd unfortunately I tried switching to GPIO3 and it locked up again after about 5 minutes. I'm going to try another new power supply tonight and meter some voltages just...

Thanks for the info @blazoncek. It appears I had a bad/intermittent ESP32 board which was brand new. I swapped the board for a different one with the same lights, code...