bogde
bogde
Did you solve this? What board are you using? It has been reported that some boards (like the Sparkfun one) work better and are more stable than the cheaper ones...
thanks for that. i have a green chinese board and a dfrobot one. i'll try to apply your math to see how it goes.
can you test and verify your math using a known weight or something like that? i think the typical output rating for your load cell is 1.8 (sensitivity - in...
I'd guess it's more of a mechanical problem, maybe "load cell creep" https://www.zemiceurope.com/en/blogs/creep.html
According to the datasheet: > Input and gain selection is controlled by the number of the input PD_SCK pulses (Table 3). PD_SCK clock pulses should not be less than 25...
i think i have some nrf52832 too, and a (cheap) logic analyser, i'll try to look into this if time permits. thanks @electrokean for all your effort.
i just checked and unfortunately i don't have the NRF52832 board. sorry.
hi @mashhashkarma , did you solve the issue? did you get the logic analyzer? do you still need any help with this? fyi, i only have this: http://dangerousprototypes.com/blog/open-logic-sniffer/ (i'm not...
sure, no problem, i'll keep it open.
can you share your code?