boblapo

Results 6 comments of boblapo

My camera failed to start after flashing the firmware (suspected)

Same here. I bricked 2x cameras trying the new process from you Themactep. following all steps, checked I can see the source file from the SDcard but boot only show...

My camera failed to start after flashing the firmware (suspected)

I don't have the traces for the 1st camera (I used your script and commands in order) Here is the full trace from the 2nd You'll see the two regular...

My camera failed to start after flashing the firmware (suspected)

pictures from the board. ![IMG_20231227_141110](https://github.com/OpenIPC/device-mjsxj03hl/assets/154933846/56b996ee-af16-46fb-9526-4b4cf164d95c) ![IMG_20231227_141131](https://github.com/OpenIPC/device-mjsxj03hl/assets/154933846/4380f1e9-3e28-420e-8e8a-b5c1802f5b5f) ![IMG_20231227_141026](https://github.com/OpenIPC/device-mjsxj03hl/assets/154933846/643c83ce-b898-4556-801c-e79e981ee27f) ![IMG_20231227_141045](https://github.com/OpenIPC/device-mjsxj03hl/assets/154933846/94169ed6-c199-436d-829d-dd87715552e2)

My camera failed to start after flashing the firmware (suspected)

damn... good catch !

My camera failed to start after flashing the firmware (suspected)

I have CH341A Mini programmer but using the clamp is not working. It fails at detecting the ZB25VQ128 spi. Do you de-solder the chip from the board to flash it...

My camera failed to start after flashing the firmware (suspected)

thanks for the tip but even if now I can restore the original firmware I still getting the same [00]... boot. tried openipc-t31l-ultimate-16mb.bin direct from programmer tried openipc-t31l-ultimate-16mb.bin via the...