Berthelot Mewen

Results 9 comments of Berthelot Mewen

Standard output is truncated and sent to the shell input on Arduino Nano 33 BLE for the default example

I've tried picocom and pyterm, both are giving me same result. I never used Wireshark to debug USB communication but it seems that the packets sent on both side have...

Standard output is truncated and sent to the shell input on Arduino Nano 33 BLE for the default example

Here's a zip containing the Wireshark capture of the problem in the file named `nano-33-ble-term-trace.pcapng`. You can especially pay attention to the lines around 697 and 713 which corresponds to...

Standard output is truncated and sent to the shell input on Arduino Nano 33 BLE for the default example

@maribu It has been a while since I last looked at this issue but it still seems to be a problem on this precise board type. I looked through multiple...

Standard output is truncated and sent to the shell input on Arduino Nano 33 BLE for the default example

I also noticed that the bad behavior was not happening consistently, sometimes (I think the first time I flashed a new firmware) the observed behavior was correct exactly as you...

Standard output is truncated and sent to the shell input on Arduino Nano 33 BLE for the default example

@Enoch247 your solution seems to "fix" the problem in a way as I don't have garbage anymore when I type a command but I still don't have the two first...

Standard output is truncated and sent to the shell input on Arduino Nano 33 BLE for the default example

I looked at the VID/PID in both `riotboot` Makefile and it seems that they are using the same pair which is 1209:7d00. See : For tinyusb : https://github.com/RIOT-OS/RIOT/blob/436b6edb694ecaffc73817c359ac31d65a09524a/pkg/tinyusb/contrib/tinyusb_descriptors.c#L102 And I...

Standard output is truncated and sent to the shell input on Arduino Nano 33 BLE for the default example

That was the problem I think, adding this module fixed this issue on my side. Thank you for the solution, as I already looked a bit at how bossac is...

Standard output is truncated and sent to the shell input on Arduino Nano 33 BLE for the default example

@dylad I tried to modify the TERM_DELAY in a range of 1 to 10 and i had no success with our issue. Regarding the terminal, as I said it does...

Standard output is truncated and sent to the shell input on Arduino Nano 33 BLE for the default example

I have absolutely no idea, for me nRF53 and nRF52- are two different types of chip and I don't think you can have compatibility between the two easily. I don't...