bmentink
bmentink
Oh, I attached it in an email reply .... nevermind, you can download it from here: [https://www.edaplayground.com/x/4aed](url)
How did you get on? Fix your issue @RGD2 ?
I have been testing with j1a8k on a ice40hx8k breakout board ... all good, no character drops. With the j4a doesn't each task run at an effective 12Mhz? Won't that...
Notice an interesting/annoying aspect of serial with the hx8k breakout board. I have my Drum trigger project running well now and it sends midi commands over serial at the 460k...
Hi James, >No, because you don't need either DTR or RTS, or any other auxiliary control line: just RX >and TX. >Perhaps our issues are to do with the FTDI...
>But recompiling and reconfiguring *did* help: Every time you recompile, >the whole design ends up placed in essentially a different random way, so >even if the same cells were left...
> DTR is (ab?)used to control the j1a/j4a reset signal. > > In that context, it's a single-bit 'gpio' type thing that just happens to be available for use that...
Are you meaning the section marked as "Ring Oscillator"? That's the only reference to random I can see .. and what is icetime? By the way, where are all the...
Tried disabling the Ring Oscillator, but still can't run the PLL at 96Mhz .. .. no response from shell.py .. or minicom
Tried that, same result. Maybe there is something wrong with the timing at that speed, I don't know enough to do a timing anaylsis .. EDIT: I ran icetime after...