Ben Maddocks

Oh ok this is a single radio version. Am I mis remembering or do they have a dual radio W series with 2.4ghz and sub ghz radios? Its nice how...

Oh wow thank you for responding to my previous issue/post its appreciated! The spi v3 is a beast, fifo based, which is fine but the errata makes it difficult. Having...

funny you say that i finally broke down and decided to try it, went to install it in playstore and all the artwork/design reminded me if a 5th grade class...

Omg! yes please i would very much like to see/use that code. Ive been working on spi mostly. I had tested my spi device on tge pins im using and...

needed to write to the rtc's backup registers for bootloader. All the registers i needed etc matched up. If i find time tonight ill check the rest its possible that...

Damn this is awesome thank you. Its vague but if memory serves 128mb can mapped to system (read only) then the rest is all indirect access after that. If thats...

Can confirm https://github.com/libopencm3/libopencm3/issues/1392 spi code works and finally gets my ili9341 working. Not much different from my earlier attempts except the flush function. Im software controlling cs without any issues...

Ok spi_send8 updated and spi_flush added, should any settings be added to spi_init as common use? Also adc was a stupid mistake on my part and example is working now...

Sorry just noticed your posts, yeah that tsize is a real problem, 0 seems to be the only logical way, dont feel like turning spi on/off after every byte. Tho...

HA yeah Im using full duplex, Its just the xfer function on the previous stm32's would send8 read8 and all was good, But before I got it working (So I...