blueapple128

I don't have a DualSense controller, but that error looks particularly bizarre: A SyntaxError like this would usually indicate some sort of Python2 vs. Python3 incompatibility, but there's nothing incompatible...

Cannot reproduce; I'm on Switch FW 15.0.1 (on a completely vanilla Switch) and NXBT works fine.

I have seen the "repeatedly connected and disconnected a second later" behavior frequently, but only when making hack changes on my end such as trying to get it to work...

I have never tried using NXBT with VMware. If you have a spare laptop to install Linux on, then sure, go ahead.

After pairing once, does reconnect work from the home screen?

Some questions to clarify what's going on: - After connecting for the first time (seeing the new controller show up on the pair menu), can you make inputs before exiting...

1a. Not sure what you mean by "corresponding sounds". Pressing stuff like X/Y/L/R after pairing should all make the same sound and the controller icon should pulse once. Pressing +/-...

2a. What do you mean by "the same one"? Does the number increase from 2 to 3 after pairing? 2b. What is the output of this command? 1b. Unfortunately, as...

Just to confirm, the whole process (unpair-connect-reconnect) still works on my end after updating to Switch FW 16.0.0.

Cannot reproduce; I have gotten it to work on 15.0.1. Don't know if helpful, but I have also found https://github.com/Brikwerk/nxbt to sometimes be more responsive on initial connect. After that,...