blockmodule

Future Request: Operation upon stopping at filament detection

3

Future Request: Operation upon stopping at filament detection Since there were no objections to my suggestion in the Snapmaker forum, I would like to make a feature request for the...

Future Request: G-code line and code display showing processing progress

2

Future Request: G-code line and code display showing processing progress Since there were no objections to my proposal in the Snapmaker forum, I would like to make the following feature...

Feature Request: Display MAC address on Snapmaker2.0 touch screen controller

2

Feature Request: Display MAC address on Snapmaker2.0 touch screen controller In my home, all of the WI-FI wireless LAN environments have MAC address restrictions in place, and you can't connect...

Feature Request: About Laser Image Capture If you have a private LAN connection to Snapmaker 2.0 via WI-FI, Luban can capture images using the camera on the laser unit. However,...

Laser/CNC touch panel operation - Control of Z-axis movement

1

Damage to the linear module due to table contact caused by misoperation during Snapmaker 2.0 touch panel operation has been observed. With the introduction of the bracing kit, when the...