Benjamin Schieder

There's just one relay in there. I wanted to have the button always toggle relay 1, regardless of single or double press. I think I found the issue, though: while...

After fixing the pin connectors of the boards it now looks better, but I still can't figure out how to control the red and blue LEDs.

For more information, I have this item: https://templates.blakadder.com/unsupported/bseed-switch-plug.html I have now tried "LED" on all pins except P6 and P7 (which are now correctly Relay 1 and Btn 1 and...

Ooof, this is getting worse. I changed P6 to "PWM". Increasing PWM up to (and including) 66 increases the intensity of the blue LED around the button. Increasing it to...

Changing P7 from Btn to PWM 2 lets me change the red light intensity somewhat, but then I can't use it as a button anymore. Maybe I shorted two pins...

Okay, I ordered a new device, should be here on Friday. Lastly, if that device is equally weird, is there a way to hook a button up to a set...

I can wait a lot, no worries! I can do it easily throught HA, I just feel like this is some "basic" functionality that should be possible without a dependency...

The replacement now arrived, but it's of course different from the one I had. This one is based around a T34 chip. They handily have pads for a few pins...

Successfully flashed the N version of your FW to it, this time without breaking or shorting any data lines hopefully. Took me a bit to realize that disconnecting and connecting...

 Done with configuration. This one is much simpler than the other, with a simple relay, a button and two LEDs, one of which I put on Wif LED_n (because...