bl4kh4k

I'm happy to be your test pilot! The PSU connects directly to the USB header on the board. Does not support the fan controllers. From what i can tell they...

That is correct, fan controller on one header, power supply on another header. [lsusb.txt](https://github.com/chestm007/linux_thermaltake_riing/files/2724485/lsusb.txt)

Sounds good.... I'll test it this evening. I'm perfectly comfortable setting up a vm with usb packet sniffing if first attempt fails :)

I'll be setting up a VM for you to work with. Doesn't appear to of worked and journalctl didn't log anything but the timestamp of the service being started. Looked...

Attached a zip with 2 files. the first_connected file is just plugging in the usb. The second one is a very chatty implementation and whoever programmed that thermaltake software for...

Added debug logs. [rgb.txt](https://github.com/chestm007/linux_thermaltake_riing/files/2738791/rgb.txt)

[debug.log](https://github.com/chestm007/linux_thermaltake_riing/files/2747140/debug.log) Still doesn't look like psu is read. All I did was pip3 uninstall... then pip3 install... shouldn't make a difference?

[debug.log](https://github.com/chestm007/linux_thermaltake_riing/files/2753385/debug.log) There we go. Did a search for any missing thermaltake files removed them manually after the uninstall... and redownloaded to a different location incase something was going wrong there...

Added rule, and rebooted. [debug.log](https://github.com/chestm007/linux_thermaltake_riing/files/2761862/debug.log)