bimalpaneru

interrupts() and noInterrupts() do not have any definition.

9

Without interrupts() and noInterrupts() there is compilation error Arduino LMIC library, Hard to have the RF95 module get working

Using RS485 with software serial at 19200 Sending 0xAA being received as 0xD5. Pulses on oscilloscope are fine. Sender: MicroMod (rx = G4, tx = G1) Receiver: RedBoard(rx =D2, tx...

LoRa RFM95/ board does not work with RedBoard/Artemis Module/ Artemis_ATP environment

2

Using RFM95 breakout board from dragino as lora shield, v1.4 to be precise. Tried using the example code for the TTN OTAA basic example. Artemis does not handle it properly....

Software Serial

1

Hi Paul, Not entirely sure about this but, does the software serial library support SERIAL_8E1? In SoftwareSerial.cpp found a `//TODO `on parity check inside the method `void SoftwareSerial::rxEndOfByte() ` Will...

This is more of query, Does this library support mac command pushed by the network servers in particular for EU868 with ADR enabled on a device/MCU using - - RFM95W-868S2...