bilelxlab

Hi @mhct i get this when i execute the connect scritp: ESSID: bebop PASSWORD: bebop ADDRESS: 192.168.0.14 DRONE_IP: 192.168.43.1 Connection closed by foreign host. can you help ?

@tnaegeli do you mean change the ip adress in the roslauch with (param name="bebop_ip" value="192.168.1.14" /) ? when i do that i get : [ERROR] [1506503854.147514340]: [ARDISCOVERY_Connection] 11:17:34:147 | ARDISCOVERY_Socket_Connect:721...

@IanMin1022 hemmm they are not on the same AP my router is 192.168.0.0 that's why in the script connect i gave ADDRESS= 192.168.0.14 ( if it's not like this what...

@IanMin1022 ifconfig shows this ! eth0 Link encap:Ethernet HWaddr A0:14:3D:BC:A7:00 inet addr:192.168.0.105 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:233 TX packets:156 errors:0 dropped:0 overruns:0...

@tnaegeli sorry i missed your email about the wifi usb dongle (Thank you for the details) 1) about changing the IP adress: i am not trying to change it permanently...

I have the same problem, it is slowing UE4 even if i don't ask for high framerates ! any new ideas since ?

Hello again ... we noticed something weird when we rostopic echo /fcu/status : header: seq: 816 stamp: secs: 1421166494 nsecs: 902796030 frame_id: fcu battery_voltage: 11.5699996948 flight_mode_ll: Height state_estimation: off

thank you for the answer. but the link is for an other robot ? and not the same board !