Manta-M8P
Manta-M8P copied to clipboard
bigtreetech
has anyone the pinout names for the DIAG pins Motor1 and Motor2 MANTA M8P board?
I have a strange behavior using a M8P equipped with a CB1 and the latest 2.1.2 image. If I shutdown the host - for example using Mainsail UI "Host Control"...
board: manta-m8p v2 ```cfg ## Z0 Stepper - Front Left on MOTOR3_A [stepper_z] step_pin: PB8 dir_pin: PB7 enable_pin: !PE0 # Rotation Distance for TR8x8 = 8, TR8x4 = 4, TR8x2...
While looking at the STEP file for M8P V2.0 it has F429 on the CPU - It should be H723, I can not find ANY version of M8P with a...
The stepper driver sockets in the M8P V2.0 CAD file are drawn in as being 8.5mm tall, while in the real world there are 11mm tall sockets on the board....
Is anyone running the configuration with an CB2 and the M8P V2? Currently I'm trying to control the speed of the Pi Fan through Klipper. Sadly according to the documentation...
Hi. I flashed Katapult with no problems. Problem occurs when I try to detect can device: `biqu@BTT-CB1:~/katapult/scripts$ python3 flashtool.py -i can0 -q` Instead of device UUID i get: > ERROR:root:Flash...
UART pins: - Not called out in the BIGTREETECH MANTA M8P V2.0 User Manual.pdf Pin Description diagram sheet 8 - These pins ARE called out in the generic-bigtreetech-manta-m8p-V2_0.cfg file for...
Good afternoon I'm still assembling my printer. I discovered a problem that the operating system often detects partitions in read-only mode after shutting down or rebooting. Please tell me how...
My equipment: Voron 2.4 board Manta-M8P v2 + CB1, head Stealthburner with EBB 2240, Eddy Coil , Knomi v2 Eddy coil is connected to the i2c port on the MP8...
