Manta-M8P
Manta-M8P copied to clipboard
bigtreetech
I am having issues configuring CAN BUS with this board, it seems the bootloader is trashed and I unable to flash firmware via sd card
In the file: BIGTREETECH MANTA M8P V1.0&V1.1 User Manual.pdf On page 28 Step 2 It says 'Push the DIP switch 4 (USB OTG) and 3 (RPIBOOT) to ON to enter...
Manta M8P refuses to go into DFU mode. The board is powered via USB with the CB connected. I can SSH to the CB1. **I have tried:** - Hold BOOT,...
在 9edb249b 中,对 v2.0 手册的两个版本都进行了更改,但这些更改并未反映在修订历史中。 当您未能更新文档时,修订历史就变得毫无意义。它在文档版本之间没有任何有意义的表达,用户也无法知道他们是否拥有文档的最新版本。 ----- In 9edb249b changes were introduced to both versions of the v2.0 manual and are not reflected in the Revision Log/修订历史. When you fail...
Currently struggling with the canbus output on the M8P. At this point, I am planning on getting a U2C and using the M8P as just the main board. Whenever I...
Hi. I bought the kit first with CB1, did not notice that the module does not support DSI. I later purchased the CM4104032 specifically to support the screen. But when...
G’day all, I recently got a mantra m8p with cb1 for my e5+ upgrade (overkill to the max) I managed to compile all the Pi os image and firmware for...
Hello Guys, I have a creality ender 5 plus with a bigtreetech manta m8p board + cb1. This seems to work as I do not get any errors on the...
Hello all, I am also writing it here, together with Reddit. I just received my Manta M8P and CB1, but am experiencing a bit of an issue here. - I...
