HermitCrab
HermitCrab copied to clipboard
bigtreetech
For the tool plate, it would be tremendously useful to document the connector types. Case in point: I am wiring up an orbiter v2 with filament runout which has all...
After a FIRMWARE_RESET is issued in Klipper the Hermit Crab CAN loses connection and refuses to reconnect to USB until it is put in DFU mode. This seems like a...
The current Klipper menuconfig shows the bootloader option when the current instructions does not show this option. To get the HC CAN board to work and provide a CAN bus...
Hi, I see you have the stl for the regular hermit crab. Would it be possible to post a step file? I realize you may not want to post it...
Hi, reposting here from https://github.com/Klipper3d/klipper/issues/4952 The CAN bus and HermitCrab toolchanger can't connect after PSU is off for a long time, and the firmware cannot be reset, requiring a RPi...
Hi, I want to make a tool plate with two heaters and thermistors for: https://www.thingiverse.com/thing:673816 or https://shop.cultivate3d.com/product/medusa-multi-material-switching-system-for-2020-rails/ Is there any way to get the HermitCrab CAN to power and control...
May we please have original STEP file of aluminum plate so we could design things around it instead of wasting time and designing something that you guys already designed? 
I see version 1 Cad/Step/Stl files are available at https://github.com/bigtreetech/HermitCrab but there are no available files for the Version 2.0 of the hermit Crab. I'm looking to fit it to...
