CB1
CB1 copied to clipboard
bigtreetech
OS System image for CB1
Cannot find files mentioned in skr pico uart setup, It seems the boot folder is empty? are these files on a different partion? these are the instructions I cannot follow...
Trying to get my klipper setup moved over to the Manta M5P with a CB1. I have gotten most of it working, but can't get the proper resolution provided to...
Picked up a CB1 and Pi4 adaptor board and flashed the Minimal image with the plan of trying retropie out on it, after installing and failing to get a working...
How do I start the screen 3.5 inch rpi lcd on the BIGTREETECH PI4B Adapter V1.0 and CB1 ?
%TITLE% says all, I believe. It is kinda pita to make update using whole new image (which expects new installation). By DEB packages I mean packages like `linux-dtb-current-sun50iw9`, `linux-image-current-sun50iw9`, `linux-u-boot-h616-current`...
I have [this](https://a.co/d/bHlh0FM) screen which I know works and I have previously used with KlipperScreen. When I plug it into the Manta, it powers up but says there's no HDMI...
Hi, I use the version V2.3.1. When I just install wireguard everything is fine, connects to the server and there is no problem but as soon as I reboot or...
Hi, I installed the latest minimal version and tried to access using ethernet cable, but didn't work.  When plugging in the ethernet cable, the leds do not light up.
Hello! Is there a possibility to connect [TS35 touch screen](https://github.com/makerbase-mks/MKS-TFT-Hardware/tree/master/MKS%20TS35-R/MKS%20TS35-R%20V2.0_002)? If I understand it correctly, it's a SPI-based screen, so in theory it should be compatible with CB1 since it's...
It was claimed this was test and worked perfect with the Manta Boards and a CB1, yet on all three of my Manta set ups (M8P, M4P, Manata EZ) these...
