CB1 icon indicating copy to clipboard operation
CB1 copied to clipboard

Published 20 hours ago • verified publisher icon bigtreetech

Eth0 is not working

Open blandown opened this issue 2 years ago • 8 comments

Hi, I installed the latest minimal version and tried to access using ethernet cable, but didn't work.

image

When plugging in the ethernet cable, the leds do not light up.

blandown avatar Sep 10 '22 22:09 blandown

Known issue read the release page

BeigeAnimal avatar Sep 11 '22 04:09 BeigeAnimal

Here is the Snip---V2.1.2 The ethernet driver of this version is still under debugging, You can use the kernel4.9 image first if you prefer to use the Ethernet rather than WiFi---

billru05 avatar Sep 11 '22 13:09 billru05

Fixed with a new release coming in about two days.

looxonline avatar Sep 27 '22 08:09 looxonline

The ETH fix released works, but it send zillions of messages to /var/log/kern.log. Please remove the logs xxx phydev->speed=100 full

creatron avatar Oct 01 '22 19:10 creatron

It's still not fixed in 2.3.1

AChorostian avatar Feb 22 '23 18:02 AChorostian

It's still not fixed in 2.3.1

It was fixed but there is a new version of the SOC that needs a slight tweak to the driver. A new image will be released soon with the updated driver.

looxonline avatar Feb 22 '23 19:02 looxonline

Is there available any OS that supports ethernet port on Manta M8P v1.1 ? I just tried Hurakan_Debian11_Mainsail_kernel4.9_20220912 Ethernet again doesn't work.

AChorostian avatar Feb 22 '23 19:02 AChorostian

Is there available any OS that supports ethernet port on Manta M8P v1.1 ? I just tried Hurakan_Debian11_Mainsail_kernel4.9_20220912 Ethernet again doesn't work.

As I mentioned, the updated OS will be coming in a few days.

looxonline avatar Feb 22 '23 19:02 looxonline