CB1
CB1 copied to clipboard
bigtreetech
OS System image for CB1
Hi, is it possible to connect a 1 wire temperature sensor on the cb1 with rpi adapter plate on the gipo pins?
How solve this? root@BTT-CB1:/home/biqu/klipper# make Building out/autoconf.h Compiling out/src/sched.o Compiling out/src/command.o Compiling out/src/basecmd.o Compiling out/src/debugcmds.o Compiling out/src/initial_pins.o Compiling out/src/gpiocmds.o Compiling out/src/stepper.o Compiling out/src/endstop.o Compiling out/src/trsync.o Compiling out/src/adccmds.o Compiling out/src/spicmds.o Compiling...
I have retried flashing my sd card and I'm still unable to get my TFT35 SPI to work (beyond the white screen). For what its worth, My CB1 is an...
I recently purchased the CB1 and Pi Adapter along with this DPI display from BTT: https://biqu.equipment/collections/lcd/products/bigtreetech-pi-tft43-dip-screen Now that support has been added for GPIO, is there any way to have...
I have tried few carrier boards for rpi CM4, but no one can boot CB1 module. CM4 module works ok with that boards and both CM4 and CB1 works with...
I want to enable SPI on the CB1 pins... But I can't run rasp-config. Does anyone know what file to change to make this happen
If overlays=spidev0_0 is uncommented in /boot/BoardEnv.txt, the system will fail to boot. This option should be removed or better documented.
Attempting to use a touch screen with the cb1. They say to change the config.txt file which is never created on the current images. Adding it manually doesn't enable USB...
Hi, I use the manta m8p with the CB1 and the waveshare 5" hdmi display with 800x480 pixel. The BoardEnv.txt file contains: extraargs=video=HDMI-A-1:800x480-24@60 and at boot the resolution is accordingly,...
CB1 eMMc on Manta M5P I have setup the CB1 eMMc as a second MCU configured gpio79 for PI-FAN which is the socket on the M5P. [mcu cb1] serial: /tmp/klipper_host_mcu...
