bighans
bighans
Thanks for the update. I have moved from various designs using 2S up to 6S, and the higher voltages gives many benefits. Hence no way back on that. I have...
I tried the software, I got 11(MA) and 21(TO). I will try these parameters. My mistake in the first email; the motor is 4225-390kv. Should possible have picked 4822-390kv.
Gents, Your comments and efforts is greatly appreciated. I needed to focus on my daytime job for a couple of days, not much time to follow up, sorry. I am...
Owen, Thanks for that. I have had a look at some of your previous work as well, very interesting. Noted that it may be worthwhile setting COMP_PWM for sensorless operation....
I have finished my SimonK test box. I had to use the teensy 3.0, as I went overboard on the functionality. It allows me to set PWM rates / Frequency,...
Just an update on the above. I updated the firmware on all three ESC and calibrated the throttle. Dissapointingly, it turned out that not all of the motors had the...
Yes, I can set up the ESC / motors in a bench and record a video, no problem. Sadly, I will be in Hong Kong for over a week starting...