bgrimwade

> Being that your getting an RPM reading on your display it sounds as though you are wired properly to that point. when you turn on the power to the...

> Unfortunately I'm far from an expert, but I do have a bit of electronic background, I would say you are ok with the motor to control wiring being that...

Thank you again for your help Chuck. I posted this problem on another forum and managed to get the answer there. The stepper controller has a 5V/24V switch which by...

> I was thinking some more about your problem, I know you said the display shows RPM, does it also show the 4 LED s on and display the cut...