Brian Glod comments

Results 5 comments of


                                            Brian Glod

Repeatably hang user processes, using memory-mapped I/O and fsync.

I have to rule this out a hardware issue, unless there's something I am missing. I have 12 drives of various manufacturers and models. I swapped out the cables, backplane,...

[hdl] IQ phase/gain corrections not synchronized to proper clock domains

You are correct! A handshake block needs to be added someplace, either inside the iq_correction.vhd or in the top-level. Probably at the top-level because the iq_correction.vhd assumes everything is in...

[fx3] Investigate/fix field checksums

Appears to still be the case: https://github.com/Nuand/bladeRF/blob/a656abcb071615f06e112f8654809145d4eec54a/fx3_firmware/src/flash.c#L265-L268

Cannot query XB-300 power output ADC during transmission

@Gigithecode I clarified the title, I hope you don't mind. To summarize what we need to do: 1. Determine why we can't pass command/control to the XB-300 during transmission. (I...

Plot maximum output power of a CW versus frequency for bladeRF 2.0 micro

The b210 has a PGA-102+ PA on it. We don't have a built-in PA (we sell a bias-tee PA attachment, the BT-100 though). The datasheet for the AD9361 transceiver says...