bggardner

Replaced rc.local modification with resize2fs_once init script

3

The base Raspbian image (2020-02-13-raspbian-buster) uses this method, and is a little cleaner than doing the checksum/replace method.

A wrapper needs to be added to `can.Notifier` so that when a bus goes down (or is down initially), the notifier will be restarted when the interface comes back up....

Network.connect() overwrites bus supplied with Network constructor

2

[This line](https://github.com/christiansandberg/canopen/blob/master/canopen/network.py#L109) in `Network.connect()` overwrites the "re-used" bus that may have been provided in the `Network` constructor. Therefore, if just `connect()` is called with no arguments (as shown first in...

Device states sleeping and alert unnecessary?

5

I question the necessity of the `sleeping` and `alert` states, and propose removing them. From the rationale for `sleeping` from #24 , I understand it may be appropriate for a...

Add time datatype, and maybe date too

6

There are use cases where only the `time` portion of a `datetime` property is relevant, such as in a daily schedule. Using the `datetime` datatype is possible, but would result...

Topology is too limiting

6

I see the device/node/property topology to be very limiting. I've struggled with creating the proper topology in my implementations, and feel that an "infinite" hierarchy would be more flexible. That...

Changing $homie value

1

In 6d852df the convention was updated with: ``` The following MQTT topics must remain unchanged when a device is in ready, sleeping or alert state: Any device attributes except $name...

Digi-Key: https://www.digikey.com/en/products/detail/analog-devices-inc/ADUM4152BRIZ-RL/5056904 Footprint: [footprints/Leaded - SOIC/PCB - LEADED - SOIC - ANALOG DEV SOIC-8 R8.PCBLIB](https://github.com/issus/altium-library/blob/master/footprints/Leaded%20-%20SOIC/PCB%20-%20LEADED%20-%20SOIC%20-%20ANALOG%20DEV%20SOIC-8%20R8.PCBLIB)