bgarderhagen

Hi. I have no accessory. I have enabled the Modbus option to activate the bus. Nothing else. The tool is some simple c# code i made myself just to log...

 This device on my laptop and just dumping the bytes recieved on the com port.

Ok. I have deactivated the modbus option on the menu. I see that the data on the bus have been reduced alot now. I can make a new log and...

This is some logs with Modbus option disabled. 15:48 5c 15:48 5c 2 19 6 15:48 5c 41 c9 8c 2 4 80 82 6 15:48 5c 41 c9 55...

Don't put to much into it. Just wipped something together to start each line with 5c. Let me check...

Yes. The empty start is from a few lines of code used to filter away address 41 c9 previously. Cleaned up log. No difference with or without the nibegw connected....

Reset the alarm before connecting nibegw ?

.. or keep alarm active while logging with nibegw connected ?

ok. Here are two logfiles. I found out what the single 5c line was. My code to detect start frame is not that advanced and breakes a message if 5c...

17:19:10 5c 41 c9 65 00 ed c0 65 09 8f 02 17:19:10 5c 17:19:10 5c 02 c7 01 8f 02 68 06 Supposed to be 17:19:10 5c 41 c9...