benniju

Which smart meter are you using?

I have the same issue, but when running Home Assistant OS on a Synology NAS with a USB SSD (passed though to the controller). I want to use the SSD...

Unfortunatly, for me the second disk does not show up, even in Supervisor Version 8.4. My second disk, where I want to move the data to, is /dev/sdb. The selector...

No, please don't close, I think the issue still persists if you have sda as internal disk and sdb as external, but I can unfortunately not test this currently.

I was able to reduce the memory usage from 5 GB when zoomed in 700% to "just" 800 MB by setting the preloading of the previous and next page to...

I have the issue that I move though many different wifi networks throughout the day at university, and my device gets a different IPv6 Addresses every time. The same also...

Hi, it appears that there should be no password by default. Maybe you changed it at some point? https://github.com/mruettgers/SMLReader/blob/baa344f9d5e39625bcd01ccc161685d4b8d42507/src/config.h#L14

 Should the quirk from the current PR work? It seems that the quirk gets loaded correctly but there is not VOC sensor.

Yes, i have noticed that as well. It could be easily fixed by changing `Energie-Dashboard aufrufen` to ` Energie-Dashboard aufrufen ` here: https://github.com/flixlix/power-flow-card-plus/blob/fbd878855e07bb0ae048c3d111971a6299c493be/src/components/misc/dashboard_link.ts#L12 I tested it by changing the code...

That's interesting. Has anyone found the data points for the Energy Cockpit in the App? (Where it shows the "instantanious" electric power going in and the thermal power going out)...