Ben Goh

I'm glad I saw your comment, @Wiki-the-Tinkerer! 😄 I have somewhat same (and somewhat different) issue with the S/TTL value reading (for me the PWM ranges in `0 ~ 12V`)....

Hi @Wiki-the-Tinkerer, just so you know, I have resolved my [wiring issues](https://github.com/makerbase-mks/MKS-DLC32/issues/493) in my scenario, just in case it helps you too.

2 days to your post's anniversary, @SLB0810, I hope you have found a solution to your problem 🙂 You would not have the "card" between MKS DLC32 and the laser...

Hi @SLB0810, just so you know, I have resolved my [wiring issues](https://github.com/makerbase-mks/MKS-DLC32/issues/493) in my scenario, just in case it helps you too.

Greetings, fellow developers! After reading through this thread, I managed to resolve the issue, and I wanted to share my experience to help others who might encounter a similar problem....

Hi @Arion1936 I didn't see your post and just made one for [my scenario](https://github.com/makerbase-mks/MKS-DLC32/issues/493), I'm wondering if you have resolved your connection issue? If so I can definitely learn something...

Hi @Arion1936, just so you know, I have solved the wiring issues in [my scenario](https://github.com/makerbase-mks/MKS-DLC32/issues/493) in case that helps you too.

> curious if the `GetHashCode` implementation should be changed? Ah no @aparajit-pratap, `Point.GetHashCode()` should not be changed. It is correctly implemented for value-based equality (same coordinates ==> same hash). The...