Jiangjie (Becket) Qin
Jiangjie (Becket) Qin
我现在是希望用的[领普的米家墙壁开关](https://home.miot-spec.com/s/linp.switch.q32)来控制涂鸦的智能灯，想法是把领普的开关设置成无线模式。这个模式下实际继电器始终通电，按开关按键的时候只是发送单个事件，不改变开关本身的状态，类似无线开关。希望能够通过按开关按键时候的事件来控制涂鸦的智能灯点亮和熄灭。 ### 环境: Raspberry Pi 4b ### 目前的状态： 1. 开关和灯都已经导入 HA 了 2. 在 automation 里面有以下配置 ``` - id: '1656768314631' alias: 客厅磁吸灯开关 description: '' trigger: - platform: device type: changed_states...
Based on the discussion in the mailing list, we would like to encourage the connector authors to share their connectors with the community, even the connectors are not in the...
Discussed with @radai-rosenblatt and we should be able to simplify the logic to track the delivered message offsets.