Ewald

nice setup for testing. So do SPACE and P just work in your case?

Found it, i used the BAUD_RATE in spacehuhn's source which is 57200, this is 400bps off from the standard baudrate of 57600. When i switched to 57600 on both devices,...

hmm, cheered to soon, it's back even with 57600 baud 😢 still investigating

this seems to do the trick, just removed all the remote font stuff in the first part of the skeleton.css file, debug mode on firefox confirms it. `const uint8_t data_skeletonCSS[]...

I found that some devices don't like the 57200 baudrate in the source (see my issue: *Problem with P* https://github.com/spacehuhn/wifi_ducky/issues/31 ) this might also be the cause for your scripts...

If you want to update the esp8266 without disconnecting the arduino(-clone), you can just use the *over the air update* as mentioned in Spacehun's readme: https://github.com/spacehuhn/wifi_ducky#update-esp8266-over-the-webinterface Only when you need...

Is this still not working? I don't get any data back when i try to check hashes :-( Even the EICAR hash check doesn't work. OK, changed the program with...

Apparently the WiFi/BT Chipset on the Pi Zero Wireless does not use the single USB 2.0 BUS so Gadget Modes will still supported, hence poisontap should work.

Just read the whitepaper on: [HAK5](https://cdn.shopify.com/s/files/1/0068/2142/files/hak5-whitepaper-keystroke-reflection.pdf) and they (probably) are using the numlock and capslock states, since those are sent from the computer to the keyboard. So numlock for the...

Sure, here is a link for surffiets.nl to the CIRCL website which uses ail-typo-squatting: https://typosquatting-finder.circl.lu/7406bc36-38d4-4066-aad8-3ca2643da652 the catch-all resolving queries are in the wrongTLD and addTLD. For instance with the .ph...