grbl-Mega
grbl-Mega copied to clipboard
bdurbrow
An open source, embedded, high performance g-code-parser and CNC milling controller written in optimized C that will run on an Arduino Mega2560
I am working on adding jogging to my keyboard testing machine. I’ve explored the grbl code and have not been able to find how to preserve the line_number from $J=…N1...
Can the functions described here : [http://linuxcnc.org/docs/devel/html/plasma/plasmac-user-guide.html#cha:plasmac-user-guide](url) be added ?, it would be a great enhancement thanks
Hello, im sure this is a electrical noise problem, but, does any one here know how to solve it ? the only problem is while external motor drivers are connected...
Jog mode bug
for example activeIncrementValue = 1.0000 when I turn encoder A or encoder B (if present) slowly - position incremented by 1 as it should. If I turn encoder rapidly back...
Hi, id like to be able to associate 2 mcode numbers to switch a pin high and low, to control relays/solenoids ect, is this possible? ive done it in mach3....
Hi after trials and tribulations I have managed to set this up with everything working, and I really like its potential, shame about not beig able to use M62 though....
sorted
Hi have just set up a mega with a 2 differant ramps 1.6 boards and the 20x4 reprap controller. I have succesfully loaded the firmware on . all the parts...
Hi I have got it working but as the title says how do I jog and zero axis ? can it be jogged from the keypad or do I have...
OK I have blundered through it all and now got all of my issues resolved !! except for m3,m4,m5 it dosnt recognise It switches on/off coolant via m8/m9 via midi,pronterface,...