bbluvgg

I knew it didn't support displaying Chinese, and I tried to find his translated files but found nothing. \config\custom_components\dwains_dashboard\translations, there are only two .json files in the directory. There are...

Some new MIOT devices need to be supported

3

**Device model** xiaomi.esteamer.mes01 **Device name** Mijia Smart Food Steamer 12L **Does the device require a MiCloud connection?** Do not know **Anything special about the device?** This is a new kind...

How can I reset the S1E connected MQTT IP address?

3

My MQTT gateway often has problems, and I want to reset the MQTT server for the S1E link. How should I reset it after telnet?only be reinstalled and executed?Or input...

如何翻译非选项文本？具体格式是什么？

1

给出的示例确实可以翻译选项文本，能否也对非选项文本全局翻译？如图所示，如果拥有大量相同传感器，一个个修改名字太麻烦了，有没有一劳永逸的方法？ `xiaomi_miot: language: zh translations: idle: '空闲' busy: '工作中' fan.mode: 'straight wind': '直吹模式' 'natural wind': '自然风'` 

我自行设计了一块CSPS电源控制多路12V输出，使用ESP32S3作为主控时，无法与CSPS电源I2C通信读取工作参数，已经仔细排除sda/scl引脚引用错误，也有5V到3.3V电平转换，而且用ESP32C3开发板也无法通讯，但换成8266开发板就能立即扫描到并即可通信。 请问你的ESP32S3需要有什么特别设计或者设置？ 地址0x5F, 0x57，通信速率100Kbps

为什么ESP32S3/C3都无法获取I2C数据？换上8266就行？

1

我DIY一项硬件项目集成了众多功能，但ESP32S3始终无法与CSPS电源I2C通信，反复检查无果（有5V→3.3V，引脚无误），换了C3也不行，但用8266就能马上识别，是不是3个声明文件有8266限制性代码？如何修改？

Support for DART WZ-S formaldehyde sensor

1

When researching formaldehyde sensors recently, I found that the DART WZ-S has high precision, comes pre-calibrated, and offers good accuracy. As ESPHome now fully requires using external components, I discovered...