bb-qq

I added the driver for epyc7002. https://github.com/bb-qq/r8152/releases/download/2.17.1-2/r8152-epyc7002-2.17.1-2_7.2.spk I would appreciate it if let me know whether it works well or not.

Under the current mechanism, drivers are loaded after the package system is ready, so LACP BOND, which is prepared at an earlier stage, is not restored at startup. If the...

I purchased a product sold in Japan that uses the RTL8156BG and confirmed that **it works**. As the vendor claims that it consumes 64% less power than the RTL8156, it...

``` + exit 0 ``` The last line indicates that the driver startup script was completed successfully. There may be an error before or after this, but is this all...

See comments here about using multiple adapters. https://github.com/bb-qq/r8152/issues/300#issuecomment-1518530441 However, I am not sure if SMB multichannel will perform as expected. Depending on the product model, the USB host controller may...

Since LACP works completely outside of the driver, there is most likely a problem with the configuration or switch. How do you verify that it is working or not?

From looking at the iperf results, it appears that a lot of retransmissions are occurring. (see the `Retr` column in the results). It could be a MTU configuration issue or...

If I reboot the device one more time, does the problem reproduce? The first boot in the log shows no configuration file and the IP settings are skipped, but the...

Could you paste `/var/packages/r8152/var/log/start-stop-status.log` here when you configure DHCP?

Could you try this test version? https://github.com/bb-qq/r8152/releases/download/2.16.3-3/r8152-braswell-2.16.3-4test.spk