r8152
r8152 copied to clipboard
[Success] `DS920+` + `D-Link DUB-2315` compatibility report
Description
Combability report for 2.16.3-3 DSM7.x
.
Configured with SMB3 support, Jumbo Frames & static IP.
Description of your products
-
Synology DiskStation DS920+ (DSM
v7.1.1-42962
) - D-Link DUB-2315 USB-C to 2.5 Gigabit Ethernet network adapter with USB-A to USB-C adapter (Realtek RTL8156B)
Description of your environment
Connected via front USB port directly to a PC using D-Link DGE-562T PCI Express 1x adapter with 100/1000/2.5GBase-T (Realtek RTL8125BG) & cable Cat.6.
Output of iperf3
command
Connecting to host 192.168.2.3, port 5201
[ 4] local 192.168.2.2 port 64939 connected to 192.168.2.3 port 5201
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 268 MBytes 2.25 Gbits/sec
[ 4] 1.00-2.00 sec 279 MBytes 2.34 Gbits/sec
[ 4] 2.00-3.00 sec 280 MBytes 2.34 Gbits/sec
[ 4] 3.00-4.00 sec 282 MBytes 2.36 Gbits/sec
[ 4] 4.00-5.00 sec 281 MBytes 2.36 Gbits/sec
[ 4] 5.00-6.00 sec 281 MBytes 2.35 Gbits/sec
[ 4] 6.00-7.00 sec 279 MBytes 2.34 Gbits/sec
[ 4] 7.00-8.00 sec 281 MBytes 2.36 Gbits/sec
[ 4] 8.00-9.00 sec 281 MBytes 2.36 Gbits/sec
[ 4] 9.00-10.00 sec 281 MBytes 2.36 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-10.00 sec 2.73 GBytes 2.34 Gbits/sec sender
[ 4] 0.00-10.00 sec 2.73 GBytes 2.34 Gbits/sec receiver
Seems there's an issue with reboot. The interface doesn't start after rebooting the NAS. Log attached.
@bb-qq could you please take a look? 🙏
I stand by your every word. The problem only works after rebooting the DS or after juggling the USB device. After that, I need to restart the driver manually.
If I reboot the device one more time, does the problem reproduce?
The first boot in the log shows no configuration file and the IP settings are skipped, but the second boot seems to have saved the configuration file correctly, so it looks like it would succeed the next time as well.
If the symptoms persist, please let me know the results of dmesg
and ifconfig -a
immediately after the reboot.
👋
Surprisingly, the second and all subsequent reboots were flawless! The interface starts up as it should, without any issues.
I think this note could be added to the FAQ list.
And thank you for the clarification 🙏
BTW, I've tried my USB adapter with a rear port of the NAS and it works as stable & fast as front one:
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-10.00 sec 593 MBytes 498 Mbits/sec sender
[ 4] 0.00-10.00 sec 593 MBytes 498 Mbits/sec receiver
[ 6] 0.00-10.00 sec 589 MBytes 494 Mbits/sec sender
[ 6] 0.00-10.00 sec 589 MBytes 494 Mbits/sec receiver
[ 8] 0.00-10.00 sec 586 MBytes 491 Mbits/sec sender
[ 8] 0.00-10.00 sec 586 MBytes 491 Mbits/sec receiver
[ 10] 0.00-10.00 sec 581 MBytes 487 Mbits/sec sender
[ 10] 0.00-10.00 sec 581 MBytes 487 Mbits/sec receiver
[ 12] 0.00-10.00 sec 576 MBytes 483 Mbits/sec sender
[ 12] 0.00-10.00 sec 576 MBytes 483 Mbits/sec receiver
[SUM] 0.00-10.00 sec 2.86 GBytes 2.45 Gbits/sec sender
[SUM] 0.00-10.00 sec 2.86 GBytes 2.45 Gbits/sec receiver
iperf Done.