bb-qq
bb-qq
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 How about changing MTU to 9000?
What does "No 5G Sync" mean? Does it mean that you measured the speed with something and it is not performing as expected? What speeds are being obtained on the...
Could you assign a different subnet for eth4? (I guess this is the AQC111 device) I would like to isolate the problem, as using the same subnet may not route...
Hmm, did you try direct connection PC to NAS without the ethernet switch?
Regarding that MikroTik switch, there is a report of compatibility problems with the RJ45 module. Perhaps the cause may be different. https://github.com/bb-qq/r8152/issues/215
Are you using the built-in Ethernet port at the same time? If you are, are the two ports configured for the same network segment?
Ok, I understood there is no routing issue. Increasing MTU to 9000 and setting the SMB protocol version to v3 may help to improve performance. Try it if you like.
There are no performance issues with the DS920+ generation hardware, so I suspect that there is something wrong with your network configuration. So, could you please tell us more about...
Also, could you try to increase `vm.min_free_kbytes`? * read: `sysctl -n vm.min_free_kbytes` * write: `sysctl -w vm.min_free_kbytes=XXXX`
@Brandoskey, have you tried to configure MTU to 9k? It is known that some platforms do not perform well enough due to USB host controllers or other causes, but at...