bausi2k

Any news on that?

@jishi thx for explanation - I could reproduced this. When I leave home, I blindly send a ```pauseall``` command and this is the reason. Basically this means nothing to worry....

What I found out so far is, that if my Playbase is on TV via optical input, the ```Pauseall``` returns an error. I will try to investigate further, if I...

happens in my case too and it seems to have the negative effect on swallowing request :-(

Maybe the hints on this side will help you further: https://community.openhab.org/t/how-to-integrate-daikin-altherma-lt-heat-pump/16488/14 I use the BRP069A61 with a shelly that closes the pins and I send HTTP Request to the BRP069A61...

For that case, the BRP069A61 works like a charm. Even if you have a static value for the allowed consumption eg. 3500W the heat-pump takes the power and heats up...

Find the complete HTML file attached and in the code section is the form data. ``` Smart Grid Pulse meter setting No meter 100 pulse/kWh 1000 pulse/kWh Electrical heaters allowed...

As far as I know, you can only tell the heatpump to do it's work with a defined amount of power in kWh. Options are * Electrical Heater [TREU/FALSE] *...

With the BRP06(whatever) you have full control about when and how long your heatpump runs, so you can optimise that. Defrosting is another issue of course… My heatpump is controlled...

> Hi @bausi2k , I found your comment here, that you are using the LAN-adapter for Daikin with Loxone. I also use Loxone and I am still looking for the...