Aaron Baker

[gphoto_output.txt](https://github.com/rlamarche/camera-toolbox/files/674533/gphoto_output.txt) looking at the output it seems like a permission/udev error with libusb. I can run the commands using sudo but when I run hpis I get 

Here it is! [canon_xt_config.txt](https://github.com/rlamarche/camera-toolbox/files/674825/canon_xt_config.txt)

Got it compiled, but my output is: 1 cameras detected Seg Fault I'm not too familiar with C/C++ debuggers at the moment to see if I can specifically find where...

1 cameras detected. Open camera : "Canon Digital Rebel XT (normal mode)" at port "usb:001,009" Error : "Unable to get single config manufacturer: Bad parameters" Error : "Unable to get...

[camera-toolbox.txt](https://github.com/rlamarche/camera-toolbox/files/677729/camera-toolbox.txt) Getting closer! Just had a black screen with an arrow with those errors listed in the file. The last 2 lines are from when I hit escape on the...

Am I supposed to be seeing images on screen? The camera starts taking pictures (not sure if that's considered live mode) but I see no image on screen Copy/Paste from...

I am able to do the command and what not but all I get is a small square on the screen 

  So I rebuilt the entire application just in case something wasn't linking right then SCP'ed it over to...

@ecurtin have you by any chance tried it? I know my Canon is a little outdated (Digital Rebel XT) not sure how much newer yours is or not to see...

Still getting the same error. I even went and did a find command for "preview.jpg" while it was running so I have no idea where in the local directory it...