Alex D

It seems that messages are received and stored into the memory but can't read them.

@helllicht i have added a dockerfile with the latest mercure and your instructions but container fails with "exit 0", does anyone have any luck in running this on pi 3...

Any news about this ? I need proxy headers v2 (as described in the protocol http://www.haproxy.org/download/1.8/doc/proxy-protocol.txt) to be added to the TCP service in order for my rabbitmq cluster to...

@SRGDamia1 yes, can't figure it out :( spent many days....

batteries are panasonic ncr18650b, all new. yes, it stops, but after the voltage spike of 4.3 for a few seconds.

charger is victron mppt, set at 24.6 V. It will not turn off, because the load will switch off also.

> > charger is victron mppt, set at 24.6 V. > > On the screenshot of diybms it shows 24.95V - how did the voltage get that high if the...

I lowered the voltage on victron. My pack is 20Ah, maybe is too small for the balacing ?

@fhorst1 kind of works, when balancing starts until it reaches the temperature the voltage overshoots, but after temperature is reached is ok. I think a better option is to limit...

Hello again, even with a lower temperature the issue was more or less the same, so i decided to build a bigger pack and everything was setup up the same...