AVR* Administrator
AVR* Administrator
Aaron Sat 29 Jul 2017 01:35:58 PM UTC Programmer hardware: BusPirate Verbose output: [https://gist.github.com/mcd1992/c9bb57071a8db5bf77d07c8a2e60c8df](https://savannah.nongnu.orghttps://gist.github.com/mcd1992/c9bb57071a8db5bf77d07c8a2e60c8df) Let me know if anymore information is needed, thanks. This issue was migrated from https://savannah.nongnu.org/bugs/?51614
Johan Olin Sat 12 Dec 2020 08:33:30 PM UTC Programmer hardware: avrisp MKII Device type: ATTiny15 avrdude -p t15 -c avrispmkii -U flash:w:file.hex Results in the dreaded 'verification error; content...
funkyluke Sun 26 Apr 2020 08:27:30 PM UTC Programmer hardware: avrisp2 Device type: 8535 EEP Programming works: avrdude -p8535 -cavrisp2 -Pusb -U eeprom:w:eep.hex --> verifies OK Flash Programming: root@luke-hp:~# cat...
Wed 14 Feb 2018 04:29:49 PM UTC Here are a set of patches against trunk which add the following features: - support for my WiFi-enabled AVR programmer which I’ve just...
Brian Mayton Tue 21 May 2013 06:30:25 PM UTC avrdude appears to be able to communicate with an ATxmega128A4U in PDI mode, but an attempt to program flash memory fails...
dg1afg Tue 13 Sep 2016 05:46:32 PM UTC I have problems programming old AT90S8515 with avrdude 6.3. It's impossible to program the controller. The output dialog as below. Reading the...
Andrei Sun 16 Mar 2014 01:21:30 PM UTC When reading device signature by issuing avrdude -px256a3bu -cdragon_jtag or programming, ATxmega256A3BU hangs and does not execute the written code. If I...
avrdude Wed 06 Nov 2013 04:14:29 PM UTC I'm using avrdude 6.01 and JTAGICEmkII and try to programm the boot section of the xmega256a3 with the following command: avrdude -c...
Galen Seitz Tue 16 Dec 2014 07:14:21 PM UTC device: xmega16d4 programmer: jtagice mkII or avrisp mkII host: CentOS 6.6 x86_64 avrdude version: 6.1 (locally built) I am unable to...
giuliano carlini Fri 19 Mar 2010 06:26:58 AM UTC STK500 'U" command takes a word address. Indeed, avrdude seems to be passing word addresses to the arduino bootloader for atmega...